
SKY-FS 除尘器
Multi-cartridge platform with pulse-jet cleaning

我们的除尘器共用同一套滤筒平台,车间可以先上一台,新增设备时继续叠加模块,无需更换风管或滤筒壳体。把工艺告诉我们,工程师会给出组合方案。
工作原理
品牌动效预览 —— 产品实拍视频制作中。

最新画册收录了完整的除尘与焊烟净化产品线——选型表、滤材选项与安装说明。可直接下载 PDF,也可以让我们按您的工艺寄送对应版本。
设备画册 · 20 MB · 滤筒画册 · 23 MB

一个厂区、一支团队 —— 设计、开模、装配同在一个屋檐下
我们在河北的同一厂区内完成挤出、打褶、焊接与装配,深耕过滤制造二十年。这意味着除尘器、滤筒与备件来自同一个供应商,也意味着技术团队能直接回答关于自己制造设备的问题。
浏览全系列
客户最常选用的系列

Multi-cartridge platform with pulse-jet cleaning

Add modules as your production grows

Everyday extraction for welding and grinding

Large air volumes and heavy dust loads

Roll it to the weld, not the weld to it

Plastic end-cap pleated cartridge for dust-collector replacement

Long-element KNT cartridge for high filter-area housings

High-capacity KNT cartridge with stainless support band

Bring differential pressure back down on site

Pre-separation for heavy dust loads

Stop sparks before they reach the filter
2026/9/24
Filter area is what keeps differential pressure down. Fitting a taller element is often cheaper than a bigger fan.
2026/9/10Spark catchers, and why they sit in front of the filter
2026/8/28Cartridge collectors and bag filters — where each one wins
2026/8/6Sizing a dust collector for a welding shop
2026/6/18KNT-SE: what the venturi end cap actually does